BBQCT - DELSTAR ACRYLIC ENAMEL, DAR 71654

  • MSDS: BBQCT
  • Manufacturer: PPG INDUSTRIES
  • Product Name: DELSTAR ACRYLIC ENAMEL, DAR 71654
  • National Stock Number: 8010-00F004378
Product Identification

Product ID:DELSTAR ACRYLIC ENAMEL, DAR 71654
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004378
MSDS Number: BBQCT

Responsible Party
PPG INDUSTRIES/CLEVELAND, OH 44111

Emergency Phone: (304) 843-1300

Cage: EO498

Contractor
PPG INDUSTRIES/CLEVELAND, OH 44111
ST JOSEPH, MI 49085 US

Telephone: 616-982-3215

Cage: EO498

Ingredients

ACRYLONITRILE (SARA III)

CAS: 107-13-1

RTECS: AT5250000

Fraction By Weight: <.01%

OSHA PEL SEE 1910.1045

ACGIH TLV: S, 2 PPM;A2 9394

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 45%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CADMIUM SULFOSELENIDE (PIGMENT)

CAS: 12626-36-7

RTECS: EV2350000

Fraction By Weight: 10%

ACGIH TLV: 0.05 MG/CUM


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:INHALATION: HEADACHE/DIZZINESS/STAGGERING
GAIT/CONFUSION/UNCONSCIOUSNESS/COMA. EYE/SKIN IRRITATION

First Aid

First Aid:FUMES: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM/QUIET. NOTIFY A PHYSICIAN. EYES: FLUSH W/WATER FOR AT LEAST 15
MINUTES. SKIN: WASH AFFECTED AREAS W/WATER. REMOVE CONTAMINATED
CLOTHING. CONSU LT A PHYSICIAN.

Fire Fighting

Flash Point:81F (PMCC)
Lower Limits:1.1%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER COOL CONTAINERS TO PREV PRESSURE
BUILD-UP/EXPLOSION.
Unusual Fire/Explosion Hazard:KEEP CONTIANERS TIGHTLY CLOSED. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAME/HOT
SURFACES/ELECTRICAL/STATIC/FRICITIONAL SPAR). AVOID BREATHING
VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT/N-SPARKING
TOOLS.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED/PROTECTED FOR STORAGE OF FLAMMLES.
Other Precautions:DON'T TAKE INTERNALLY. CONTAINERS SHOULD BE GROUNDED
WHEN POURING. AVOID FREE FALL OF LIQ. IN EXCESS OF A FEW INCHES.
DON'T AME CUT/BRAZE OR WELD W/OUT NIOSH APPROVED RESP/VENTILATION.

Exposure Controls

Respiratory Protection:CONFINED AREAS: USE SUPPLIED AIR RESPIRATORS OR
HOODS
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT
W/CONTAMINATED CLOTHING.
Supplemental Safety and Health
MSDS DATE: 12 MAR 85. WT/GAL: 9.03

Chemical Properties

Boiling Pt:B.P. Text:110-194C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58.7

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES MAY CONTAIN: CO/ACRYLONITRILE

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.